Top 5 Accessible Ways to Use Jeep Renegade Tire Service Kit

You are having a happy trip? But! Your car got a punctured tire! Do not worry! We are here to help you have some knowledge to solve this problem. Leather1993 will introduce you to our article Top 5 Accessible Ways to Use Jeep Renegade Tire Service Kit. We hope this article is good for you. If you have more time, you can visit our store to find some Key fob cover for Jeep. We have a lot of products of designs and colors for you to choose from.

Contents

Power My Sky System

If equipped, the Power My Sky System can retract just like a sunroof. You’ll find the controls in the overhead console. To automatically open the front panel, push and release the open/close switch. Completely closing it, from the fully open position, pull and release the open/close switch. To vent the front panel, push and release the vent switch. During vent operation, any use of the open/close switch will stop the panel from closing.

Electric Park Brake

Opening Park Brake

Your Electric Park Brake, or EPB, is designed to prevent rolling while parked so, before leaving the vehicle, make sure the parking brake is applied. Also, make sure the transmission is in Park. To apply the parking brake manually, push down or pull up on the switch momentarily. You’ll hear a whirring noise while it engages. Once engaged, you’ll see a light on the switch and a “Brake” warning in your instrument cluster. If the auto park brake is enabled, the EPB will engage whenever you shift into Park.

**Top 5 Accessible Ways to Use Jeep Renegade Tire Service Kit** – Parking button

The parking brake will release any time the ignition is cycled into the Run position, the transmission is in Drive or Reverse and the seat belt is buckled. To release the parking brake manually, the ignition must be in the Run position. Press the brake pedal, then push the park brake switch momentarily. Once the parking brake is disengaged, the “Brake” warning lamp and switch light will both go out.

Operating Tire Service Kit

If rare and exceptional circumstances make it necessary to engage the parking brake while in motion, push down or pull up on the switch for as long as the engagement is desired. The “Brake” warning lamp will appear, and you’ll hear a warning chime. The rear stop lamps will illuminate automatically while the vehicle is in motion. To disengage the parking brake while in motion, release the switch. If you come to a complete stop using the EPB, once you reach approximately 3 mph or 4.8 km/h, the parking brake will remain engaged.

Leather1993 also wants to tell you that your vehicle’s Electric Park Brake also features Safehold. Safehold is a safety feature that will engage the parking brake automatically if the vehicle is left unsecured while the ignition switch is in the Run position when the engine is on. For example, Safehold will automatically engage the parking brake if the vehicle is at a standstill, there is no attempt to press the brake pedal or accelerator pedal, the seat belt is unbuckled, and the driver’s door is open.

Tire Service Kit

Preparing Kit

Here’s hoping you’ll never have to use it, but if you do get a flat tire, knowing how to use your Tire Service Kit repair system will get you back on the road quickly and safely. A quick note though, for more detailed information, including where the Tire Service Kit is stored on your vehicle, refer to your Owner’s Information.

Remember that Roadside Assistance may be available; consult your Owner’s Information for details. If you do experience a flat tire, pull over to a safe location and turn on your hazard lights. Position the tire that needs inflating so that the valve stem is located near the ground. This will allow the Tire Service Kit hose to reach the valve stem with the Tire Service Kit flat on the ground.

Tire Service Kit Using

Place the transmission in Park for automatic transmission vehicles or in gear for manual transmissions, turn off the ignition, and set the parking brake.

Place the Tire Service Kit on the ground next to the flat tire. Now, screw the clear flexible filling tube to the tire valve. Insert the power plug into the vehicle’s power outlet socket. Start the vehicle engine. Push the Tire Service Kit power button to the “I” position. The electric compressor will be turned on and sealant and air will inflate the tire. Minimum 26 psi – 1.8 bar, of pressure, should be reached within 20 minutes. If it has not reached the pressure, turn off and remove the Tire Service Kit, and drive the vehicle 30 feet – 10 meters back and forth, to better distribute the sealant inside the tire.

Attach the clear flexible filling tube of the compressor directly to the tire valve and repeat the inflation process. When having reached the correct pressure, start driving the vehicle to uniformly distribute the sealant inside the tire. After 10 minutes, stop and check the tire pressure. If the pressure is below 19 psi – 1.3 bar, do not drive the vehicle, as the tire is too damaged. Contact the nearest Authorized Dealer. If the pressure is at 19 psi -1.3 bar or above, repeat the inflation process to reach the correct tire pressure and continue driving.

Peel off the warning label from the bottle and place it on the dashboard as a reminder to the driver that treats the tire with the Tire Service Kit. Replace the sealant canister prior to the expiration date at an Authorized Dealer.