Mercedes GLC-Class and driver assistance features
Mercedes GLC-Class and driver assistance features are in a series of tutorial articles, sharing the knowledge of using the car, and the features equipped on the car models. The Mercedes-Benz GLC-Class is a mid-size luxury SUV/Crossover segment (corresponding to the C-Class class of sedans) of the German automaker Mercedes-Benz. Mercedes GLC 200 appeared to help customers have a new choice for themselves. Collision prevention Blind Spot, Lane Keeping Assist, and Bas Plus.
Blind Spot Assist
What is Blind Spot Assist?
Active Blind Spot Assist is an assistance system for helping to prevent accidents. It supports you when changing lanes and warns you of any vehicles which are recognized in your vehicle’s blind spot. It can additionally help you avoid a potential collision by means of a course-correcting application of the brakes.
Active Blind Spot Assist can be activated or deactivated using the buttons on the multifunction steering wheel to access the assistance menu of the instrument cluster. The radar sensor can be used to capture an area up to 3 meters behind the vehicle as well as the area directly on the side of the vehicle. Active Blind Spot Assist supports you from a speed of around 30 kilometers per hour.
The working principle of Blind Spot Assist
While driving if vehicles are recognized in the detected area. You will be made aware of this by means of a warning symbol illuminating the exterior mirror. If you subsequently switch on the turn signals to change lanes the warning lamp flashes red and a warning tone additionally sounds to draw your attention to a possible collision. If you fail to react to this warning active Blind Spot Assist initiates a course-correcting application of the brakes for you.
The application of the brakes can be counteracted. At any time by means of a gentle steering movement or by accelerating narrow vehicles. Such as motorcycles may not be detected or may only be detected too late. Dirty sensors may also lead to vehicles not being correctly recognized. Active Blind Spot Assist is only an aid and is not a substitute for attentive driving. Therefore always pay attention to traffic conditions and your surroundings.
Lane Keeping Assist
What is Lane Keeping Assist?
Active lane-keeping assist increases driving safety. It warns you before you leave your lane unintentionally and can intervene to correct the lane in the event of an emergency. The system is active at speeds of 60 km/h and above. You can turn on the assistance system using the button next to the steering wheel. If the indicator lamp in the button lights up the assistance system is active under lane-keeping assist in the assistance menu of the onboard computer.
You can select from either the standard or adaptive setting in the standard setting. The system will issue a warning with a brief vibration in the steering wheel.
The working principle of Lane Keeping Assist
If you drive past the lane markings, the system will not warn you. If you’ve switched on the turn signals or if a driving safety system such as ABS intervenes in the adaptive setting there is also no vibration warning if you accelerate hard or break sharply steer actively or cut a corner on a sharp bend. And if you don’t respond to the assist warning, the vehicle will assist with the brake application to correct the course. A display message appears in the multifunction display and your vehicle is steered back into the lane.
Improper interrupt applications can interrupt at any time. If you steer slightly in the opposite direction use the turn signals or brake or accelerate significantly. The assistance system does not keep your vehicle in its lane. This system is only an aid and may not work well due to poor visibility and dirt on the camera or road surface. Or if there are no lane markings for this reason always pay attention to traffic conditions and your surroundings.
Bas Plus
What is Bas plus?
Bas plus with cross-section assist helps you brake quickly when there is a risk of collision. Bas plus can help you to reduce the risk and severity of accidents. If you approach an obstacle and the system has detected a risk of collision at speeds between 7 and 250 km/h, bas plus calculates the braking force necessary to prevent it. A collision with the detected obstacle at speeds below 30 km/h braking. Assistance is carried out at the last possible moment when driving at a speed above 30 km/h. If you depress the brake pedal sharply BAS Plus automatically increases the brake pressure to a degree suited to the traffic situation. At speeds of up to approximately 70 km/h bas + with cross-traffic assist can also detect stationary or intersecting obstacles.
The working principle of Bas plus
In addition, it is possible to identify pedestrians close to the vehicle. ABS prevents any of the wheels from locking for as long as you depress the brake pedal as soon as you release the brake pedal or there is no longer a risk of collision or no obstacle is detected in front of your vehicle. The brake boost function is withdrawn again bas plus cannot always clearly identify objects and complex traffic situations. Therefore always pay careful attention to the traffic situation and be ready to break.
See more:
Some Mercedes key fobs cover our store providing:
Hope the above article has helped you better understand more about Mercedes GLC-Class And driver assistance features. Please leave your comments below the comment section to let us know. Feel free to contact us for more information!
How to use Volkswagen Remote Start key
How to Connect Volkswagen with Android Auto easily
How to Connect Apple CarPlay with Volkswagen
Knowing how-to Pairing Bluetooth with Volkswagen
How to Recall Chevrolet Memory Seats