How To Use Lincoln Key Intelligent Access

This easy-to-follow article will help explain how to lock and unlock your doors and start and stop your engine without ever having to reach for your keys. It will also show you how to enter the vehicle and start it if the battery in your key FOB dies. The article How To Use Lincoln Key Intelligent Access will have you solve your problems.

We hope you find this post useful. If you have more time, check our shop for some of Lincoln key protector. You can pick from a wide variety of patterns and colors in our items.

Contents

Use Lincoln Key Intelligent Access With Push-Button Start

Introduction about Key Intelligent Access

Sometimes it’s the simplest things that make owning a Lincoln a pleasure. Intelligent access with a push-button start can be used on the front doors or on some models all four doors. In fact, with your key fob in your possession such as in your pocket or purse, you can unlock the doors, start the ignition and lock all of your doors.

Unlocking/Locking the Door with Key

To unlock your doors, touch the unlock sensor on the back side of the door handle for about a half second. Be sure not to touch the lock sensor on the front simultaneously as it requires a brief delay to verify your unique key fob. Then pull in to lock your doors, simply press the sensor on the door handle for about a half second.

It’ll have ridges like this be sure not to touch the unlock sensor on the back of the handle. When you hear them click, you’ll know they’re locked. You can also immediately pull on it to confirm locking. Or you can press the lock button on the inside door panel. Before closing the door and it will automatically lock.

Opening Lincoln Trunk or Liftgate

You can also open your trunk or lift gate without using the key by pressing the button switch located to the right of the rear brake light or in the liftgate handle. Starting your vehicle is simple once inside just press and hold the brake pedal while you push the engine start/stop button. To turn it off be sure the vehicle is in the park and push the start/stop button again.

Using Lincoln Physical Key fob

If the battery in your remote dies or the signal is interrupted. You can still get into your vehicle and start it using the removable key inside the fob to unlock the driver’s door. Just press the button on the front of the key fob and slide the key out.

Now depending on which model you have you can either insert it into the exposed key cylinder and turn it to unlock. Or you may need to insert the key into the slot on the fender badge between the front fender and driver door to unlock your door. Or pull the door handle out.

When you do you’ll notice the key cylinder is located at the end of the handle here. Just insert the key and turn to unlock once you’re in there’s either a pocket in the center console or a slot in the cupholder that’s made just for the key fob. It will allow you to start your car. Place the key fob in the slot with the buttons facing up. And the unlock button toward the front of the vehicle.

Note for driver about Key

Keep in mind that the key is programmed to your car. If you lose it you’ll need to contact your dealer for a replacement. One more thing to help prevent locking the key fob inside of your vehicle. Depending on how the vehicle is set up if left inside. You may hear a horn chirp indicating the fob has been left in the vehicle and the doors will not lock.

More following to other related posts:

See more:

Lincoln Key fob covers in the U.S.

What 3 Clear Steps to use Perfect Position Seats in Lincoln

Taking 5 Easy ways to set your Phone as a Lincoln Key

-32%