What do you do when drive Audi at Traffic Jam

Traffic Jam Assist and Active Lane Assist are two advanced driver assistance systems (ADAS) available in Audi vehicles. Traffic Jam Assist uses radar and camera sensors to enable automated acceleration, braking, and steering control during slow-moving traffic, while Active Lane Assist helps keep the vehicle centered in its lane by gently nudging the steering wheel. The article What do you do when drive Audi meeting Traffic Jam will have you solve your problems.

We hope you find this post useful. If you have more time, check our shop for some Audi leather key cases. You can pick from a wide variety of patterns and colors in our items.

Contents

Audi Traffic Jam Assist

After a long day at the office, traffic jam assist can help reduce the stress of your drive home. Enriched with the vehicle and environmental data from two-front radar sensors. 8 ultrasonic sensors and a windshield-mounted camera traffic jam assist. That can help guide you at speeds up to 40 miles per hour. Traffic jam assist is based on outies adaptive cruise control system with stop-and-go functionality.

**What do you do when drive Audi meeting Traffic Jam** – Driver Assistance Display

Plus an additional component for lateral guidance press the button to turn Traffic Jam Assist system on or off. When adaptive cruise control is active and the traffic jam assist indicator is green vehicles in front of your vehicle can be detected. If you were in the driver assistance display the message traffic jam assist available appears if the system recognizes congestion.

Now when traffic slows to a stop and then begins to move shortly Traffic Jam Assist can monitor the area around the vehicle. And follow the vehicle ahead within the limits of the system. Traffic Jam Assist can orient itself to lane markings roadside structures. And other vehicles on the road when traffic jam assist reaches its limits for example when traffic thins out.

There is a sharp curve ahead you will be prompted to take control of the vehicle. You will see a warning in the instrument cluster display if you fail to take over driver assist breaks the vehicle. Until it is stationary traffic jam assist is another example of innovative outtie technology that can help make your drive less stressful.

Audi Active Lane Assist

Active Lane Assist can detect Lane marker lines and if activated warn you if your vehicle begins to drift out of the lane. It can also help in keeping the vehicle centered in the lane when the early intervention is selected in the MMI. A camera mounted in front of the rearview mirror scans the road to detect Lane markings. If you are approaching a detected Lane marker line and it appears you will leave the lane.

The active Lane assist will warn you with a vibration and corrective steering. The driver can override the corrective steering at any time now if you activate the turn signal. Before crossing a lane marker Active Lane Assist doesn’t warn you since it assumes that you are changing lanes intentionally. If your vehicle is equipped with side assist and it detects a vehicle in your blind spot even if you activate the turn signal.

There will be noticeable corrective steering shortly before you leave the lane. You can turn Active Lane Assist on or off by pressing the button on the end of the turn signal lever. When Active Lane Assist is turned on the indicator lines illuminate. White Lines indicate the system is active but not ready to give a warning this can occur. If lanes are too wide narrow curving or other criteria necessary for the system.

Operating Audi Active Lane Assist

To operate are not present active Lane assist is designed for highways and expressways. So it is only active above approximately 40 miles per hour at that speed the Active Lane assist lines in the instrument cluster. It will turn to Green indicating the system is active and ready to provide warnings. You can adjust individual active Lane assist settings in the MMI Press menu then using the control knob select a vehicle.

Then left the drawer and then select driver assistance and Audi Active Lane Assist. Here you can adjust the steering timing when late is selected corrective steering occurs. Just before the vehicle goes over the lane marker. When you select early corrective steering happens continuously to help keep the vehicle in the center of the lane. You can also switch the vibration warning in the steering wheel on or off.

All of these settings will be retained for the next drive cycle. And it will also be personalized to the currently used key fob. You may want to temporarily deactivate the lane assist system in bad weather conditions. Be with limited visibility on bad roads with no or barely visible Lane markings. When driving off the paved Road or if the camera’s field of view is covered by dust dirt ice or snow be sure. To activate active Lane assist when road conditions improve allowing Active Lane Assist. And to help you as you travel on highways and expressways.