How To Change A Toyota Camry Remote Fob Smart Key Battery

Today, we’re here to guide you through a quick and simple process of changing the battery in your Toyota Camry’s smart key. It’s an easy DIY task that can save you time and money. To get started, all you need is a CR2032 battery and a small screwdriver or a tool with a fine point. Let’s dive right in. The article How To Change A Toyota Camry Remote Fob Smart Key Battery will have you solve your problems.

We hope you find this post useful. If you have more time, check our shop for some of Toyota car key cover. You can pick from a wide variety of patterns and colors in our items.

Contents

Removing the Emergency Key

Release the Emergency Key: Start by removing the emergency key located at the bottom of your smart key. You can do this by holding down the small release button and gently pulling the key out.

Key Orientation: Take a close look at your emergency key. Notice a slight lip or indentation on one side. This lip should align with a corresponding slot inside your smart key.

Insert and Turn: Carefully insert the emergency key into the designated slot, ensuring it’s fully pushed in. Now, turn it just like you would when unlocking a door. This action will pop open the smart key’s cover, giving you access to the internal components.

Replacing the Battery

Locate the Battery: Inside the smart key, you’ll easily spot the battery. It’s usually a CR2032-type battery.

Remove the Old Battery: Use your small screwdriver or pointed tool to gently lift the old battery out. Pay attention to the battery’s orientation; you’ll need to install the new battery the same way.

Insert the New Battery: Take your new CR2032 battery and insert it into the slot, ensuring the plus side (+) faces up.

Check for Activation: It’s always a good idea to test the key before reassembling it. Press any button on the smart key to ensure it lights up, indicating that the battery is functioning correctly.

Reassembling the Smart Key

Check the Rubber Grommet: Before closing the smart key, make sure that the small rubber grommet around the edges is properly seated.

Snap the Cover Shut: Align the two halves of the smart key and press them together until you hear a satisfying snap, indicating that the cover is securely closed.

Reinsert the Emergency Key: Slide the emergency key back into its slot, making sure it clicks into place.

Final Test: Confirm that everything is in working order by using your smart key to lock and unlock your Toyota Camry.

More following to other related posts:

See more:

Toyota Key fob cover – First-rate Key case in the U.S.

Top 2 Exclusive Toyota Features – Interior Light/ Moon Roof

TOP 3 Adaptable Toyota Drive Modes Features

-18%